dmesg - MSI AG240
microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.0-040100-lowlatency (kernel@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201506220235 SMP PREEMPT Mon Jun 22 06:44:55 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb27ffff] usable
BIOS-e820: [mem 0x00000000bb280000-0x00000000bb286fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb287000-0x00000000bbacbfff] usable
BIOS-e820: [mem 0x00000000bbacc000-0x00000000bbd92fff] reserved
BIOS-e820: [mem 0x00000000bbd93000-0x00000000cb71ffff] usable
BIOS-e820: [mem 0x00000000cb720000-0x00000000cb7a9fff] reserved
BIOS-e820: [mem 0x00000000cb7aa000-0x00000000cb7c0fff] ACPI data
BIOS-e820: [mem 0x00000000cb7c1000-0x00000000cb979fff] ACPI NVS
BIOS-e820: [mem 0x00000000cb97a000-0x00000000cbf79fff] reserved
BIOS-e820: [mem 0x00000000cbf7a000-0x00000000cbffefff] type 20
BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xcb7ae000 ACPI 2.0=0xcb7ae000 SMBIOS=0xcbf78518
SMBIOS 2.8 present.
DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-AE6711/MS-AE671, BIOS EAE67IMS V8.0B8 02/26/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 0220000000 mask 7FF0000000 write-back
3 base 00E0000000 mask 7FE0000000 uncachable
4 base 00D0000000 mask 7FF0000000 uncachable
5 base 00CE000000 mask 7FFE000000 uncachable
6 base 00CD000000 mask 7FFF000000 uncachable
7 base 022FE00000 mask 7FFFE00000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 8704MB, range: 256MB, type WB
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 3328MB, range: 256MB, type UC
reg 5, base: 3296MB, range: 32MB, type UC
reg 6, base: 3280MB, range: 16MB, type UC
reg 7, base: 8958MB, range: 2MB, type UC
total RAM covered: 8142M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3200MB, range: 64MB, type WB
reg 4, base: 3264MB, range: 16MB, type WB
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
reg 8, base: 8958MB, range: 2MB, type UC
e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x031e3000, 0x031e3fff] PGTABLE
BRK [0x031e4000, 0x031e4fff] PGTABLE
BRK [0x031e5000, 0x031e5fff] PGTABLE
init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[mem 0x22fc00000-0x22fdfffff] page 2M
BRK [0x031e6000, 0x031e6fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x22fbfffff]
[mem 0x220000000-0x22fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbb27ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbb1fffff] page 2M
[mem 0xbb200000-0xbb27ffff] page 4k
init_memory_mapping: [mem 0xbb287000-0xbbacbfff]
[mem 0xbb287000-0xbb3fffff] page 4k
[mem 0xbb400000-0xbb9fffff] page 2M
[mem 0xbba00000-0xbbacbfff] page 4k
BRK [0x031e7000, 0x031e7fff] PGTABLE
init_memory_mapping: [mem 0xbbd93000-0xcb71ffff]
[mem 0xbbd93000-0xbbdfffff] page 4k
[mem 0xbbe00000-0xcb5fffff] page 2M
[mem 0xcb600000-0xcb71ffff] page 4k
BRK [0x031e8000, 0x031e8fff] PGTABLE
init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
[mem 0xcbfff000-0xcbffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35812000-0x36c00fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CB7AE000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CB7AE090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CB7BB440 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CB7AE1C8 00D275 (v02 ALASKA A M I 00000808 INTL 20120711)
ACPI: FACS 0x00000000CB978080 000040
ACPI: APIC 0x00000000CB7BB550 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CB7BB5E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0x00000000CB7BB630 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MSDM 0x00000000CB7BB6D8 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x00000000CB7BB730 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
ACPI: SSDT 0x00000000CB7BB790 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000CB7BB9B8 00018F (v01 Intel zpodd 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CB7BBB48 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CB7BC088 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 0x00000000CB7BCB60 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CB7BCBA0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CB7BCBD8 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CB7BCEF0 003E50 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 0x00000000CB7C0D40 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000CB7C0D78 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
NODE_DATA(0) allocated [mem 0x22fdf6000-0x22fdfafff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000022fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bb27ffff]
node 0: [mem 0x00000000bb287000-0x00000000bbacbfff]
node 0: [mem 0x00000000bbd93000-0x00000000cb71ffff]
node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
node 0: [mem 0x0000000100000000-0x000000022fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
On node 0 totalpages: 2077167
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12946 pages used for memmap
DMA32 zone: 828499 pages, LIFO batch:31
Normal zone: 19448 pages used for memmap
Normal zone: 1244672 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb280000-0xbb286fff]
PM: Registered nosave memory: [mem 0xbbacc000-0xbbd92fff]
PM: Registered nosave memory: [mem 0xcb720000-0xcb7a9fff]
PM: Registered nosave memory: [mem 0xcb7aa000-0xcb7c0fff]
PM: Registered nosave memory: [mem 0xcb7c1000-0xcb979fff]
PM: Registered nosave memory: [mem 0xcb97a000-0xcbf79fff]
PM: Registered nosave memory: [mem 0xcbf7a000-0xcbffefff]
PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88022fa00000 s100888 r8192 d30184 u262144
pcpu-alloc: s100888 r8192 d30184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044687
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8029760K/8308668K available (8281K kernel code, 1224K rwdata, 3864K rodata, 1424K init, 1292K bss, 278908K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 2394.739 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.47 BogoMIPS (lpj=2394739)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff82097000 - ffffffff8209e000)
ftrace: allocating 33526 entries in 131 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000cbe9d000 end: 0x000000cbeabfff
dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3
microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38315.82 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb280000-0xbb286fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcb7c1000-0xcb979fff] (1806336 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 15:58:29, date: 06/26/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022598BC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88022595C000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880225993400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:b723] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7900000-0xf7903fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 7 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb280000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbacc000-0xbbffffff]
e820: reserve RAM buffer [mem 0xcb720000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs NTN0530 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0xcf200000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20412K (ffff880035812000 - ffff880036c01000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc4d0a000-0xc8d0a000] (64MB) mapped at [ffff8800c4d0a000-ffff8800c8d09fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1435334308.423:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.0-040100-lowlatency xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.0-040100-lowlatency xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.0-040100-lowlatency ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.1.0-040100-lowlatency ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: [email protected]
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b68b7861532bdab2f3d9b1dfbf2e1870eee5d846'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:986:993
machinecheck machinecheck6: hash matches
memory memory36: hash matches
rtc_cmos 00:02: setting system clock to 2015-06-26 15:58:29 UTC (1435334309)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1424K (ffffffff81f33000 - ffffffff82097000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1948K (ffff880002819000 - ffff880002a00000)
Freeing unused kernel memory: 232K (ffff880002dc6000 - ffff880002e00000)
random: systemd-udevd urandom read with 4 bits of entropy available
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x25 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:33:35:55]
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 31
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 31
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a380 irq 31
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 1-5: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: PLEXTOR PX-128M5M, 1.03, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata6.00: ATA-8: HGST HTS721010A9E630, JB0OA3B0, max UDMA/133
scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-128M5 1.03 PQ: 0 ANSI: 5
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
sda: sda1 sda2 sda3 sda4
ata3.00: ATAPI: TSSTcorp CDDVDW SU-208FB, TM00, max UDMA/100
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: configured for UDMA/133
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208FB TM00 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
scsi 5:0:0:0: Direct-Access ATA HGST HTS721010A9 A3B0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 1-5: New USB device found, idVendor=046d, idProduct=c52b
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB Receiver
usb 1-5: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
usb 1-7: new high-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=174f, idProduct=173d
usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-7: Product: USB Video Device
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 200901010001
random: nonblocking pool is initialized
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 2394.444 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2283b729bc7, max_idle_ns: 440795325667 ns
usb 1-8: new full-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=22b9, idProduct=0019
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: MS-AE61 236 SP13003 Touch Panel
usb 1-8: Manufacturer: eTurboTouch Technology Inc.
usb 1-9: new high-speed USB device number 5 using xhci_hcd
usb 1-9: New USB device found, idVendor=07ca, idProduct=0335
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: H335
usb 1-9: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
usb 1-9: SerialNumber: 306473100022
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
usb 1-10: new high-speed USB device number 6 using xhci_hcd
usb 1-10: New USB device found, idVendor=0bda, idProduct=0139
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: USB2.0-CRW
usb 1-10: Manufacturer: Generic
usb 1-10: SerialNumber: 20100201396000000
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-12: new full-speed USB device number 7 using xhci_hcd
Switched to clocksource tsc
usb 1-12: No LPM exit latency info found, disabling LPM.
usb 1-12: New USB device found, idVendor=13d3, idProduct=3410
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-12: Product: Bluetooth Radio
usb 1-12: Manufacturer: Realtek
usb 1-12: SerialNumber: 00e04c000001
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Nameserver information manager.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nuvoton-cir 00:06: Wake PNP Port not valid!
nuvoton-cir 00:06: disabled
EDAC MC: Ver: 3.0.0
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
EDAC ie31200: No ECC support
usbcore: registered new interface driver btusb
Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150410/video-1281)
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
usb 1-12: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
fbcon: inteldrmfb (fb0) is primary device
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
rtl8723be 0000:03:00.0: enabling device (0000 -> 0003)
rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
media: Linux media interface: v0.10
input: Logitech K400 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input13
logitech-hidpp-device 0003:046D:400E.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:14.0-5:1
input: eTurboTouch Technology Inc. MS-AE61 236 SP13003 Touch Panel as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:22B9:0019.0005/input/input14
hid-multitouch 0003:22B9:0019.0005: input,hidraw2: USB HID v1.10 Device [eTurboTouch Technology Inc. MS-AE61 236 SP13003 Touch Panel] on usb-0000:00:14.0-8/input0
hid-generic 0003:22B9:0019.0006: hiddev0,hidraw3: USB HID v1.10 Device [eTurboTouch Technology Inc. MS-AE61 236 SP13003 Touch Panel] on usb-0000:00:14.0-8/input1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
input: MSI WMI hotkeys as /devices/virtual/input/input16
Linux video capture interface: v2.00
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.59 Tue Mar 31 14:10:31 PDT 2015
Adding 8306684k swap on /dev/sdb6. Priority:-1 extents:1 across:8306684k FS
uvcvideo: Found UVC 1.00 device USB Video Device (174f:173d)
input: USB Video Device as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usbcore: registered new interface driver rtsx_usb
usb 1-9: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
usb 1-9: dvb_usb_v2: found a 'Avermedia H335' in warm state
usb 1-9: dvb_usb_af9035: [0] overriding tuner from 38 to 60
usb 1-9: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Avermedia H335)
af9033 8-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
af9033 8-0038: Afatech AF9033 successfully attached
usb 1-9: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
it913x 8-001c: ITE IT913X BX successfully attached
Registered IR keymap rc-it913x-v2
input: Avermedia H335 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/rc/rc0/input18
rc0: Avermedia H335 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/rc/rc0
usb 1-9: dvb_usb_v2: 'Avermedia H335' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_af9035
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
systemd-journald[297]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1435327120.325:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.325:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.337:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.337:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.337:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.337:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.353:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.353:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.353:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1435327120.353:11): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=611 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
bbswitch: version 0.7
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
vgaarb: this pci device is not a vga device
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
ACPI Error: Field [TBF3] at 274432 exceeds Buffer [NULL] size 262144 (bits) (20150410/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.GETB] (Node ffff8802270e1410), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff8802270e13e8), AE_AML_BUFFER_LIMIT (20150410/psparse-536)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
wlan0: authenticate with a4:52:6f:bc:37:4f
wlan0: send auth to a4:52:6f:bc:37:4f (try 1/3)
wlan0: authenticated
wlan0: associate with a4:52:6f:bc:37:4f (try 1/3)
wlan0: RX AssocResp from a4:52:6f:bc:37:4f (capab=0x411 status=0 aid=1)
wlan0: associated
vgaarb: this pci device is not a vga device
wlan0: deauthenticating from a4:52:6f:bc:37:4f by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:0c:f6:37:c0:89
wlan0: send auth to 00:0c:f6:37:c0:89 (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
rtl8723be 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlan0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:0c:f6:37:c0:89 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with a4:52:6f:bc:37:4f
wlan0: send auth to a4:52:6f:bc:37:4f (try 1/3)
wlan0: authenticated
wlan0: associate with a4:52:6f:bc:37:4f (try 1/3)
wlan0: RX AssocResp from a4:52:6f:bc:37:4f (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from a4:52:6f:bc:37:4f by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:0c:f6:37:c0:89
wlan0: send auth to 00:0c:f6:37:c0:89 (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
rtl8723be 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlan0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlan0: associated
wlan0: Connection to AP 00:0c:f6:37:c0:89 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 00:0c:f6:37:c0:89
wlan0: send auth to 00:0c:f6:37:c0:89 (try 1/3)
wlan0: authenticated
rtl8723be 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
rtl8723be 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlan0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlan0: associated
wlan0: deauthenticating from 00:0c:f6:37:c0:89 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with a4:52:6f:bc:37:4f
wlan0: send auth to a4:52:6f:bc:37:4f (try 1/3)
wlan0: authenticated
wlan0: associate with a4:52:6f:bc:37:4f (try 1/3)
wlan0: RX AssocResp from a4:52:6f:bc:37:4f (capab=0x411 status=0 aid=1)
wlan0: associated